1x4sri_lion said:Is it 2x2 or 1x4 ?


Anusha said:1x4
Northbridge is under lots of stress. I have to up the voltages a little bit more to make it POST. AUTO always works, but that is because the mobo automatically increases it to a level where it would POST.![]()

64bit biatch!sri_lion said:hmm... so you wanna cool it a bit? Anyway does your mobo read it as 4GB? because I heard in some ASUS mobo if you install 1x4 it will only recognize less than 3GB because it seems there's some address space issue!!
Dont really know whether this is true but, even my mobo manual say so!!
Any idea?![]()
(There is an option to enable all the mem addresses, but should only do so if you have a 64bit OS)
Anusha said:64bit biatch!(There is an option to enable all the mem addresses, but should only do so if you have a 64bit OS)
I wanna cool it a bit because there is no active cooling on it, and it heats up to a point easily where you can't touch it for more than a second. :S
mokadda une?dexter.morgan.666 said:System Updated
No Mother Board![]()
![]()
( Back to the OLD PC)
cruthrones said:Hei guys here is mine.....
Intel Core2 Duo 1.80GHz Processer
Intel Motherboard
1GB Kingston RAM (667MHz)
250GB Hitachi Hard Disk (SATA)
256MB VGA 7600 - Geforce Nvidea(Greet)
ViewSonic E70fsB 17" Monitor
ASUS 18X DVD Writer (with Lightscribe) SATA
Sony 52X DVD Writer



ha ha weraduna neda koluwo 



nuwa1 said:Kohenda ban umbata 52X DVD Writer ekak hambuneha ha weraduna neda koluwo
![]()

3GB -> 4GB upgrade lowered the overclock (at the same settings)nuwa1 said:Anusha, mokakda ban umbe comp eke seen eka???

AwesomeGavindu said:800Mhz Intel Processor
512Ram
10GB Hdd
32Mb VGA
ONB Soud .............. Not kidding tho![]()
![]()

Anusha said:3GB -> 4GB upgrade lowered the overclock (at the same settings)
To achieve the same overclock, need to increase NB voltage further, and it is dangerous!

Gavindu said:800Mhz Intel Processor
512Ram
10GB Hdd
32Mb VGA
ONB Soud .............. Not kidding tho![]()
![]()

I'll be happy with 2.765GHz, until I *someday* buy a 45nm high multi Penryn Quady!nuwa1 said:Oh i see, so what u r going to do? nothing to do ha![]()
because of the FSB strap issue in P5B series mobos.
http://prometheusxt.blogspot.com/2007/12/asus-p5b-fsb-strap.htmlnuwa1 said:mokakda P5B series Mobos wala front side bus issue eka?