Latest ads
-
Gemini AI PRO 18 months Offer- Hawaka
- Updated:
-
koko account
- DasunEranga
- Updated:
-
koko account
- DasunEranga
- Updated:
Toshiba e studio 306 printer setup
- Thread starter dinukap4
- Start date
Machan network installation ekak karanna.... Network cable ekak one (Patch cable). devices and printers wala add a printer gihin local or network printer option eka select karala machine ekata dunna driver ekenma install karaganna puluwan. ea okkotama kalin photo copier ekata ip address, subnet mask, gateway settings denna. Toshiba machine wala user function wala admin eke network settings thiyenne...
Mei wage api normally computer ekak router ekata connect karana cable ekak neda oni ? Machn Computer eken directly printer ekata meka plug karannada tiyenne ? Router ekak hara nemei neda ?
Na na machan.. directly computer ekai printer ekai connect karanna... ow machan api normal router ekai computer ekai connect karana cable eka thama.
The e-Studio 306 has an Ethernet interface and a USB. You can print from one of them or both. For Ethernet you configure it for TCP/IP printing and for USB just direct printing. In a network you have to use TCP/IP printing. If it's just a single computer you can use the USB port.
With that you can't Scan documents that's what I got to know scanning only can be done via Ethernet.
Photocopier ekai computer ekai network cable ekakin connect karala control pannel eke devices and printers wala add a printer gihin eeta passe ena searching for devices window eke connect una machine eka pennanawada balanna.. ehema nm connection eka build wela thiyenne
Correct... The e-Studio series is meant to be used on a network environment. Scanning functionality is not supported with USB connection to a host - but you can scan to any attached USB media device.
Also it might not work with a cross cable as suggested here. I haven't tested this but I remember that Toshiba says that's not supported due to the instability of such a connection.
yes you are right... it might not work with a cross cable. But it works with a Patch cable. I have already installed about hundreds of Toshiba e-studio B/W and color photocopier machines via network.
Last edited:
Because it's mentioned in the Toshiba Tech manual. I haven't directly connected any using a cross-over cable myself. If it works that's fine. Good to know. Maybe it's just a warning.How do you say that might not work with a cross cable?I have already installed about hundreds of Toshiba e-studio B/W and color photocopier machines.
