...DVD-RW.............

[gama22]

mage dvd writer eke icon eka missing, device manager eketh penanne ne
motherboard bios set up eke primary slave widihata dvd writer eka aragena thiyenne mata help ekkak denawada

 

[kosandpol]

Is it detected by the CMOS setup ?

 

[yazir94]

RESTART n C

 

[gama22]

yes machan it detect as IDE primary slave but it shoud be detected as sata, ne?

 

[[email protected]]

restart ur pc

 

[kosandpol]

yes machan it detect as IDE primary slave but it shoud be detected as sata, ne?

Is it a SATA drive ?

 

[gama22]

RESTART n C

no i have try more than 10 times

 

[prabu901104]

plug it in "1" not "0" and see

 

[gama22]

it s a sata dvdrw

 

[kosandpol]

it s a sata dvdrw

Is the CMOS SATA setup properly done ? is the SATA drivers installed in windows ?

 

[gama22]

i can.t understand, why does it identify as primary slave hard disk

 

[gama22]

Is the CMOS SATA setup properly done ? is the SATA drivers installed in windows ?

can u explain it.

 

[kosandpol]

i can.t understand, why does it identify as primary slave hard disk

Because your Hard Disk is the Primary Master device.
You cannot have 2 Master devices on the same channel.

 

[gama22]

Because your Hard Disk is the Primary Master device.
You cannot have 2 Master devices on the same channel.

bro it should be sata DvdRW no?

 

[kosandpol]

can u explain it.

Your CMOS has settings for the SATA controller. This is different from Motherboard to Motherboard. You have to set the settings that is most compatible with the dvdrw drive.

Also in you have to install the SATA drivers in windows so that the SATA controller is identified and controlled properly by Windows.

 

[kosandpol]

bro it should be sata DvdRW no?

How windows idetifies it is dependent on how the CMOS shows it to windows. Looks like what you got is a CMOS misconfiguration in the SATA controller settings.

 

[gama22]

then is it batter to remove device and plug it again? my m,board is asrook k8 series

 

[kosandpol]

then is it batter to remove device and plug it again? my m,board is asrook k8 series

I've no idea about that board or its settings. Better you get a person who knows about this board and SATA to configure it for you.

 

[gama22]

I've no idea about that board or its settings. Better you get a person who knows about this board and SATA to configure it for you.

ok bro i'll see thanks for u're kind help

 

[Malinga]

i can.t understand, why does it identify as primary slave hard disk

oyaage Sata DVD Writer eka IDE Hard Disk ekak vashayen pennanava kiyala da oyaa kiyanne?